AutoCAD Tip

A Faster Way to Change an Object's Elevation Using MOVE

To change an object's elevation use MOVE and enter just a displacement rather than the traditional two step sequence of using a base point and a second point of displacement. "A dis-what", you say? Please, let me explain. You probably already know that you can use Relative Coordinates. For example: You type @1,2 for a second point to move 1 unit in the X direction, 2 units in the Y direction from whatever random point you picked as a base point. Without the @ symbol in front you go directly to the absolute coordinates (1,2) (and how many times have you forgotten that silly little @ symbol, UNDO, try again, ugh!). So, what I'm trying to tell you is to save time and effort you need only type in the amount you would like to move an object in the X, Y, and Z directions. Here's how it works.

Let's say you are editing a grading plan and need to raise the elevation of a polyline representing a building pad by 0.43 feet.

1. Start the MOVE command.
2. Select the object(s).
3. Type 0,0,0.43
4. Hit ENTER twice to terminate the command.

The command line looks something like this:

Command: MOVE 
Select objects: 1 found 
Select objects: Base point or displacement: 0,0,0.43 
Second point of displacement or :  
[Enter] 
[Enter] 

The same concept can be applied to the COPY command. Suppose you have a polyline representing the edge of pavement and now you want to create a top of curb polyline a half foot higher.

Command: copy
Select objects: 1 found

Select objects:  Specify base point or displacement, or [Multiple]: 0,0,.5
Specify second point of displacement or :
[ENTER]
[ENTER]

Did you happen to notice the Multiple option on the command line? Now your productivity is screaming fast!

Source: Original concept from Dave Pitzer's article on the Autodesk web site titled "AutoCAD LT: The Displacement Option for Copy and Move"

Back to Tips page.